Selection of scientific articles using the Bio-Logic potentiostats

Important note: please cite us as “Bio-Logic SAS” and possibly send us the information when your paper is published using our instrumentation.
Updated : January 30, 2013 . Note: this list is not supposed to cover all articles published by our clients.


Anodising AZ31 in a Phosphonium Ionic Liquid: Corrosion Protection through Composite Film Deposition
Julie-Anne Latham, Patrick C. Howlett, Douglas R. MacFarlane, Anthony Somers, and Maria Forsyth.
J. Electrochem. Soc. 2012, Volume 159, Issue 11, Pages C539-C545.

The effect of current mode and discharge type on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloy AJ62
R.O. Hussein, P. Zhang, X. Nie, Y. Xia, D.O. Northwood
Surface and Coatings Technology, Volume 206, Issue 7, 25 December 2011, Pages 1990-1997.

On the electrochemical migration mechanism of tin in electronics
Daniel Minzari, Morten S. Jellesen, Per Møller, Rajan Ambat
Corrosion Science, Volume 53, Issue 10, October 2011, Pages 3366-3379.

Electrochemical migration of tin in electronics and microstructure of the dendrites
Daniel Minzari, Flemming Bjerg Grumsen, Morten S. Jellesen, Per Møller, Rajan Ambat
Corrosion Science, Volume 53, Issue 5, May 2011, Pages 1659-1669.

Corrosion inhibition of C38 steel in 1 M hydrochloric acid medium by alkaloids extract from Oxandra asbeckii plant
M. Lebrini, F. Robert, A. Lecante, C. Roos
Corrosion Science, Volume 53, Issue 2, February 2011, Pages 687-695.

Untangling galvanic and passivation phenomena induced by sulfide minerals on precious metal leaching using a new packed-bed electrochemical cyanidation reactor
Abdelaaziz Azizi, Catalin Florin Petre, Caroline Olsen, Faïçal Larachi
Hydrometallurgy, Volume 107, Issues 3-4, May 2011, Pages 101-111.

Electrochemical behaviour of aluminium/steel rivet joints
L. Krüger, M. Mandel
Corrosion Science, Volume 53, Issue 2, February 2011, Pages 624-629.

Anti-corrosive properties of S. tinctoria and G. ouregou alkaloid extracts on low carbon steel
A. Lecante, F. Robert, P.A. Blandinières, C. Roos
Current Applied Physics, Volume 11, Issue 3, May 2011, Pages 714-724.

The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA7150
D.K. Xu, N. Birbilis, P.A. Rometsch
Corrosion Science, Volume 54, January 2012, Pages 17-25.

FIB/SEM study of AA2024 corrosion under a seawater drop, part II
Peter C. King, Ivan S. Cole, Penny A. Corrigan, Anthony E. Hughes, Tim H. Muster, Sebastian Thomas
Corrosion Science, Available online 15 October 2011.

Effect of solution treatment on the corrosion behaviour of aluminium alloy AA7150: Optimisation for corrosion resistance
D.K. Xu, N. Birbilis, D. Lashansky, P.A. Rometsch, B.C. Muddle
Corrosion Science, Volume 53, Issue 1, January 2011, Pages 217-225.

The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA7150
D.K. Xu, N. Birbilis, P.A. Rometsch
Corrosion Science, Volume 54, January 2012, Pages 17-25.

Marine aerobic biofilm as biocathode catalyst
Benjamin Erable, Ilse Vandecandelaere, Marco Faimali, Marie-Line Delia, Luc Etcheverry, Peter Vandamme, Alain Bergel
Bioelectrochemistry, Volume 78, Issue 1, From fundamentals to microbial power plants: Electrochemically Active Biofilms, April 2010, Pages 51-56.

Electrochemical and quantum chemical studies of some indole derivatives as corrosion inhibitors for C38 steel in molar hydrochloric acid
M. Lebrini, F. Robert, H. Vezin, C. Roos
Corrosion Science, Volume 52, Issue 10, October 2010, Pages 3367-3376.

Catalysis of the electrochemical reduction of oxygen by bacteria isolated from electro-active biofilms formed in seawater
Sandrine Parot, Ilse Vandecandelaere, Amandine Cournet, Marie-Line Delia, Peter Vandamme, Mathieu Berge, Christine Roques, Alain Bergel
Bioresource Technology, Volume 102, Issue 1, Special Issue: Biofuels – II: Algal Biofuels and Microbial Fuel Cells, January 2011, Pages 304-311.

Geobacter sulfurreducens can protect 304L stainless steel against pitting in conditions of low electron acceptor concentrations
Maha Mehanna, Regine Basseguy, Marie-Line Delia, Alain Bergel
Electrochemistry Communications, Volume 12, Issue 6, June 2010, Pages 724-728

Electrodeposited Zn–TiO2 nanocomposite coatings and their corrosion behavior
Adriana Vlasa, Simona Varvara, Aurel Pop, Caius Bulea, Liana Maria Muresan
J Appl Electrochem (2010) 40:1519–1527

Electrochemical methods to analyse the light-induced plating process
J. Bartsch, V. Radtke, C. Schetter,S. W. Glunz
J Appl Electrochem (2010) 40:757–765.

Role of nanostructure in pitting of Al-Cu-Mg alloys
K.D. Ralston, N. Birbilis, M.K. Cavanaugh, M. Weyland, B.C. Muddle, R.K.W. Marceau
Electrochimica Acta, Volume 55, Issue 27, EMERGING TRENDS AND CHALLENGES IN ELECTROCHEMISTRY, Selection of papers from the 60th Annual Meeting of the International Society of Electrochemistry 16-21 August 2009, Beijing, China, 30 November 2010, Pages 7834-7842.

Influence of microstructure on the corrosion behavior of nitrocarburized AISI H13 tool steel obtained by pulsed DC plasma
R.L.O. Basso, R.J. Candal, C.A. Figueroa, D. Wisnivesky, F. Alvarez
Surface and Coatings Technology, Volume 203, Issues 10-11, 25 February 2009, Pages 1293-1297.

Effect of Geobacter sulfurreducens on the microbial corrosion of mild steel, ferritic and austenitic stainless steels
Maha Mehanna, Regine Basseguy, Marie-Line Delia, Alain Bergel
Corrosion Science, Volume 51, Issue 11, November 2009, Pages 2596-2604.

Role of direct microbial electron transfer in corrosion of steels
Maha Mehanna, Regine Basseguy, Marie-Line Delia, Alain Bergel
Electrochemistry Communications, Volume 11, Issue 3, March 2009, Pages 568-571.

Effect of heat treatment on the corrosion resistance of Ni-based and Cu-based amorphous alloy coatings
Y.H. Yoo, S.H. Lee, J.G. Kim, J.S. Kim, C. Lee
Journal of Alloys and CompoundsVolume 461, Issues 1-2, , 11 August 2008, Pages 304-311.

Corrosion behavior of TiN, TiAlN, TiAlSiN thin films deposited on tool steel in the 3.5 wt.% NaCl solution
Yun Ha Yoo, Diem Phuong Le, Jung Gu Kim, Sun Kyu Kim, Pham Van Vinh
Thin Solid Films Volume 516, Issue 11, Proceedings of the International Symposium on Dry Process (DPS 2006) Nagoya, Japan, November 29-30, 2006, 1 April 2008, Pages 3544-3548.

Environmental friendly plasma electrolytic oxidation of AM60 magnesium alloy and its corrosion resistance
Fa-he CAO, Long-yong LIN, Zhao ZHANG, Jian-qing ZHANG, Chu-nan CAO
Transactions of Nonferrous Metals Society of ChinaVolume 18, Issue 2, , April 2008, Pages 240-247.

Effect of Si addition to CrN coatings on the corrosion resistance of CrN/stainless steel coating/substrate system in a deaerated 3.5 wt.% NaCl solution
Y.H. Yoo, J.H. Hong, J.G. Kim, H.Y. Lee, J.G. Han
Surface and Coatings Technology, 2007 (201) Issue 24, 9518-9523.

Novel bis-silane/TiO2 bifunctional hybrid films for metal corrosion protection both under ultraviolet irradiation and in the dark
Liang Liu, Ji-Ming Hu, Wen-Hua Leng, Jian-Qing Zhang, Chu-Nan Cao Scripta Materialia, 2007 (57) Issue 6, 549-552.

Evaluation of ionic imprinted polymers by electrochemical recognition of rare earth ions
Xi-Zhong Li, Yan-Ping Sun

Hydrometallurgy, 2007 (87) Issues 1-2, 63-71.

Corrosion resistance of pulsed laser-treated Ti-6Al-4V implant in simulated biofluids
Nikita Zaveri, Manas Mahapatra, Andrew Deceuster, Yun Peng, Leijun Li, Anhong Zhou
Electrochimica Acta, 2008 (53) Issue 15, 5022-5032.

A silane pre-treatment for improving corrosion resistance performances of emeraldine base-coated aluminium samples in neutral environment
Laura Cecchetto, Alain Denoyelle, Didier Delabouglise, Jean-Pierre Petit
Applied Surface Science, 2008 (254) Issue 6, 1736-1743.

The effect of electrochemically simulated titanium cathodic corrosion products on ROS production and metabolic activity of osteoblasts and monocytes/macrophages
Marie Kalbacova, Sophie Roessler, Ute Hempel, Roman Tsaryk, Kirsten Peters, Dieter Scharnweber, James C. Kirkpatrick, Peter Dieter
Biomaterials, 2007 (28) Issue 22, 3263-3272.

Evaluation of microbially influenced corrosion with electrochemical noise analysis and signal processing
Nikita Zaveri, Rongtao Sun, Nephi Zufelt, Anhong Zhou, YangQuan Chen
Electrochimica Acta, 2007 (52) Issue 19, 5795-5807.

Using ion implantation to study localized corrosion of Al
C. M. Johnson, F. D. Wall, J. C. Barbour
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2003 (206), 1062-1065.

Durability investigation of carbon nanotube as catalyst support for proton exchange membrane fuel cell
X. Wang, W. Li, Z. Chen, M. Waje and Y. Yan,
Journal of Power Sources, 2006, 158 (1), 154-159.

Electrodeposition of FeCoNi thin films for magnetic-MEMS devices
B.Y. Yoo, S.C. Hernandez, D.-Y. Park and N.V. Myung
Electrochim. Acta, 2006, 51 (28),6346-6352.

Understanding aluminum behaviour in aqueous alkaline solution using coupled techniques: Part I. Rotating ring-disk study
J. Bernard, M. Chatenet and F. Dalard
Electrochim. Acta, 2006, 52(1), 86-93.

Formation of inositol hexaphosphate monolayers at the copper surface from a Na-salt of phytic acid solution studied by in situ surface enhanced Raman scattering spectroscopy, Raman mapping and polarization measurement,
Yang H., YangY., Yang Y.-H., Liu H., Zhang Z., Shen G. and Yu R.,
Anal. Chim. Acta, 2005, 548 (1-2), 159-165.

Aluminium corrosion in room temperature molten salt.
Beatrice Garcia, Michel Armand
Journal Of Power Sources, short communication, 132, (2004), 206-208.

Using ion implantation to study localized corrosion of Al.
C.M. Johnson, F.D. Wall, J.C. Barbour
Nuclear Instruments and Methods in Physics Research, B 206, (2003), 1062-1065.

A statistics-based approach to studying aluminium pit initiation: intrinsic and defect-driven pit initiation phenomena.
F.D. Wall, and M.A. Martinez
Journal of The Electrochemical Society, 150 (4), 2003, B146-B157.

Corrosion // Uniscan Instruments

P. Cano, J. R. Kish, and J. R. McDermid

On the Evolution of Cathodic Activity during Corrosion of Magnesium Alloy AZ31B in a Dilute NaCl Solution Corrosion Science and Technology

Electrochem. Soc. 163(3), 2016, pp C62-C68



P. Cano, J. R. McDermid, and J. R. Kish

Cathodic activity of corrosion filaments formed on Mg alloy AM30

Electroch. Soc., 162, 2015, pp C732-C740



Esmaeili, J. Neshati, I. Yavari

Corrosion inhibition of new thiocarbohydrazides on the carbon steel in hydrochloric acid solution

Journal of Industrial and Engineering Chemistry, 22, 2015, pp 159–163



F. Pagotto, M. F. Montemor, F. J. Recio, A. J. Motheo, A. M. Simões, P. Herrasti

Visualisation of the galvanic effects at welds on carbon steel

Braz. Chem. Soc., 26, 2015, pp 667-675



Mouanga, F. Andreatta, M.-E. Druart, E. Marin, L. Fedrizzi, M.-G. Olivier

A localized approach to study the effect of cerium salts as cathodic inhibitor on iron/aluminum galvanic coupling

Corrosion Science, 90, 2015, pp 491–502



Rodriguez, W. Yuxi; R. Akid, R. Leiva; Y. Wualiang

Design of an FPGA-based eddy current instrument for the detection of corrosion pits

Instrumentation and Measurement Technology Conference (I2MTC), 2015 IEEE International

(M470 positioning stage)


D. Sidane , E. Bousquet , O. Devos, M. Puiggali, M. Touzet, V. Vivier, A. Poulon-Quintin
Local electrochemical study of friction stir welded aluminum alloy assembly
J. Electroanal. Chem., 737, 2015, pp 206–211
(SECM370 & LEIS370)

S.H. Salleh, S. Thomas, J.A. Yuwono, K. Venkatesan, N. Birbilis
Enhanced hydrogen evolution on Mg (OH)2 covered Mg surfaces
Electrochimica Acta, 161, 2015, pp 144–152

D. Sidane, M. Touzet, O. Devos, M. Puiggali, J.P. Larivière, J. Guitard
Investigation of the surface reactivity on a 304L tensile notched specimen using scanning electrochemical microscopy
Corrosion Science, 87, 2014, pp 312-320

K. Ding, K. Xiao, S. Zou, C. Dong, R. Zhao, X. Li
Electrochemical Corrosion Behavior of PCB-HASL in NaHSO3/Na2SO3 solution
Acta Metallurgica Sinica, 2014, 50, 10, pp 1269-1278 (in Chinese)

S. Gao, C. Dong, H. Luo, K. Xiao, X. Pan, X. Li
Scanning electrochemical microscopy study on the electrochemical behavior of CrN film formed on 304 stainless steel by magnetron sputtering
Electrochimica Acta, 114, 2013, pp 233– 241

H. Li, C. Dong, S. Zou, K. Xiao, M. Sui, P. Zhong, X. Li
Corrosion behavior of ultra high strength steels in different single mould environments
Journal of Chinese Society for Corrosion and Protection, 2013, 33, 2, pp 129-135 (in Chinese)

R.J. Jiang, Y.F. Cheng
Mechanism of electrochemical corrosion of steel under water drop
Electrochemistry Communications, 35, 2013, pp 8–11

S. Li, R. Akid
Corrosion fatigue life prediction of a steel shaft material in seawater
Engineering Failure Analysis, 34, 2013, pp 324-334

M. Mouanga, M. Puiggali, B. Tribollet, V. Vivier, N. Pébère, O. Devos
Galvanic corrosion between zinc and carbon steel investigated by local electrochemical impedance spectroscopy
Electrochimica Acta, 88, 2013, pp 6-14

S. Zou, X. Li, C. Dong, H. Li, K. Xiao
Effect of mold on corrosion behavior of Printed Circuit Board-Copper and enig finished
Acta Metallurgica Sinica, 2012, 48, 6, pp 687-695 (in Chinese)

S. Zou, K. Xiao, C. Dong, H. Li, X. Li
Effect of mold on corrosion behavior of immersion silver finished printed circuit board
Science and Technology Review, 2012, 30, 11, pp 21-26

G.-L. Song, Z. Xu
Crystal orientation and electrochemical corrosion of polycrystalline Mg
Corrosion Science, 63, 2012, pp 100–112

L.Y. Xu, Y.F. Cheng
An experimental investigation of corrosion of X100 pipeline steel under uniaxial elastic stress in a near-neutral pH solution
Corrosion Science, 59, 2012, pp 103–109

R. Leiva-García, R. Akid, D. Greenfield, J. Gittens, M.J. Munoz-Portero, J. García-Antón
Study of the sensitisation of a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926), by means of scanning electrochemical microscopy
Electrochimica Acta, 70, 2012, pp 105-111

D. Trinh, P. Dauphin Ducharme, U. Mengesha Tefashe, J. R. Kish and J. Mauzeroll
Influence of edge effects on local corrosion rate of magnesium alloy/mild steel galvanic couple
Analytical Chemistry, 84, 2012, pp 9899-9906

K. B. Deshpande
Effect of aluminium spacer on galvanic corrosion between magnesium and mild steel using numerical model and SVET experiments
Corrosion Science, 62, 2012, pp 184-191

K. B. Deshpande
Numerical modeling of micro-galvanic corrosion
Electrochimica Acta, 56, 2011, pp 1737-1745

M. Sun, K. Xiao, C. Dong, X. Li, P. Zhong
Electrochemical behavior of ultra high strength steels with corrosion products
Acta Metallurgica Sinica, 2011, 47, 4, pp 442-448 (in Chinese)


Terada, R. Albuquerque Marques, A. M. Simões, A. Fernando Padilha, I Costa

Use of SECM to compare corrosion resistance of DIN W. Nr. 1·4460 high N and AISI 316L austenitic stainless steels in physiological solutions

Corrosion Engineering, Science and Technology, 46, August 2011, pp 599-604



F. Dong, H. Luo, K. Xiao, X. G. Li, Y. F. Cheng

In Situ Characterization of Pitting Corrosion of Stainless Steel by a Scanning Electrochemical Microscopy

Journal of Materials Engineering and Performance, 21, 2012, pp 406-410



M. Souto, J. J. Santana, A. G. Marques and A. M. Simões

Local electrochemical impedance spectroscopy investigation of corrosion inhibitor films on copper

ECS Transactions, 41, 2012, pp 227-235



K. B. Deshpande
Validated numerical modelling of galvanic corrosion for couples: Magnesium alloy (AE44)–mild steel and AE44–aluminium alloy (AA6063) in brine solution
Corrosion Science, 52, 2010, pp 3514-3522

K. B. Deshpande
Experimental investigation of galvanic corrosion: Comparison between SVET and immersion techniques
Corrosion Science, 52, 2010, pp 2819-2826

G.A. Zhang, Y.F. Cheng
Micro-electrochemical characterization of corrosion of pre-cracked X70 pipeline steel in a concentrated carbonate/bicarbonate solution
Corrosion Science 52, 2010, pp 960–968

Z.Y. Liu, X.G. Li, Y.F. Cheng
In-situ characterization of the electrochemistry of grain and grain boundary of an X70 steel in a near-neutral pH solution
Electrochemistry Communications, 12, 2010, pp 936-938

C. Dong, Y. An, X. Li, H. Sheng, K. Xiao
Electrochemical performance of initial corrosion of 7A04 aluminium alloy in marine atmosphere
The Chinese Journal of Nonferrous Metals, 2009, 19, 2 (in Chinese)

H. Zhou, X. Li, C. Dong, K. Xiao, T. Li
Corrosion behavior of aluminum alloys in Na2SO4 solution using the scanning electrochemical microscopy technique
International Journal of Minerals, Metallurgy and Materials Volume 16, Number 1, 2009, pp 84

G.A. Zhang, Y.F. Cheng
Micro-electrochemical characterization and Mott–Schottky analysis of corrosion of welded X70 pipeline steel in carbonate/bicarbonate solution
Electrochimica Acta, 55, 2009, pp 316–324

G.A. Zhang, Y.F. Cheng
Corrosion of X65 steel in CO2-saturated oilfield formation water in the absence and presence of acetic acid
Corrosion Science, 51, 2009, pp 1589-1595
(LEIS370 / SVP370)

X. Liu, T. Zhang, Y. Shao, G. Meng, F. Wang
Effect of alternating voltage treatment on the corrosion resistance of pure magnesium
Corrosion Science, 51, 2009, pp 1772-1779

M. Terada, A. F. Padilha, A. M. P. Simoes, H. G. de Melo, I. Costa
Use of SECM to study the electrochemical behavior of DIN 1.4575 superferritic stainless steel aged at 475 °C
Materials and Corrosion, 60, 2009, 889-894

Y. Yin, L. Niu, M. Lu, W. Guo, S. Chen
In situ characterization of localized corrosion of stainless steel by scanning electrochemical microscope
Applied Surface Science, 255, 2009, pp 9193-9199

H. Krawiec, V. Vignal, R. Akid
Numerical modelling of the electrochemical behaviour of 316L stainless steel based upon static and dynamic experimental microcapillary-based techniques
Electrochimica Acta, 53, 2008, pp 5252-5259


Rossi, M. Fedel, F. Deflorian, and M. del Carmen Vadillo

Localized electrochemical techniques: Theory and practical examples in corrosion studies

R. Chim., 11, 9, 2008, pp. 984–994



P. de Lima-Neto, J. P. Farias, L. F. G. Herculano, H. C. de Miranda, W. S. Araújo, J.-B. Jorcin, N. Pébère
Determination of the sensitized zone extension in welded AISI 304 stainless steel using non-destructive electrochemical techniques
Corrosion Science, 50, 2008, pp 1149-1155

L. Dzib-Pérez, J. González-Sánchez, T. Pérez, P. Bartolo-Pérez, A. Juárez
The role of solidification rate in the corrosion resistance of a directionally solidified novel aluminium–lanthanum alloy
Scripta Materialia, 55, 2006, pp 255-258
M. Reffass, R. Sabot, C. Savall, M. Jeannin, J. Creus, Ph. Refait
Localised corrosion of carbon steel in NaHCO3/NaCl electrolytes: role of Fe(II)-containing compounds
Corrosion Science, 48, 2006, pp 709–726

Y.N. Kok, R. Akid, P.Eh. Hovsepian
Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique
Wear, 259, 2005, pp 1472-1481

N. Ochoa, F. Moran, N. Pébère, B. Tribollet
Influence of flow on the corrosion inhibition of carbon steel by fatty amines in association with phosphonocarboxylic acid salts
Corrosion Science, 47, 2005, pp 593-604

G. Baril, C. Blanc, M. Keddam, N. Pébère
Local electrochemical impedance spectroscopy applied to the corrosion behavior of an AZ91 magnesium alloy
Journal of The Electrochemical Society, 150, 2003, pp B488-B493


Aballe, M. Bethencourt, F.J. Botana, M. Marcos and J.M. Sánchez-Amaya

ENM study of corrosive systems showing high drift

15th International Corrosion council, 2002, Granada



Jan Ivar Skar, Darryl Albright

Emerging trends in corrosion-protection of Mg die-castings

Magnesium Technology 2002, Edited by H.I. Kaplan, TMS (The Minerals, Metals & Materials Society)



J. A. Wharton, B. G. Mellor, R. J. K. Wood and C. J. E. Smith
Crevice corrosion studies using electrochemical noise measurements and a scanning electrode technique
Journal of The Electrochemical Society, 147, 9, 2000, pp 3294-3301


Zhangwei Guo, Tao Liu, Y. Frank Cheng, Na Guo, Yansheng Yin
Adhesion of Bacillus subtilis and Pseudoalteromonas lipolytica to steel in a seawater environment and their effects on corrosion
Colloids and Surfaces B: Biointerfaces, 157, 2017, 157-165


Manon Chloé Lafouresse, Marie-Laetitia de Bonfils-Lahovary, Lydia Laffont, Christine Blanc
Hydrogen mapping in an aluminum alloy using an alternating current scanning electrochemical microscope (AC-SECM)
Electrochemistry Communications, 80, 2017, 29-32