HTF-1100

Insulation material: Fiber Alumina

Heating System: Super Kanthal 1350°C wire built in a cement cylinder

Temperature Range: Ambient up to 1100°C

Temperature Controller: PM6 Watlow PID controller

Temperature Sensors: Two K-Type Thermocouples (one for furnace, one for sample)

Temperature Control Accuracy: Better than +/-1°C

Temperature scan: adjustable (from 0.1 °C/min to 20 °C/min)

Safety Features: Emergency stop button; Buzzer sound alarm; Temperature safety limit

Return to the list

HTF-1100 is a High Temperature Furnace able to reach 1100°C.

This furnace has to be used in conjunction with a MTZ-35 impedance analyzer and a specific sample holder designed for high temperature measurements.

HTF-1100 consists of a temperature control unit, an alumina heater and a slide on the front panel to insert and extract easily the sample holder from the furnace.

The temperature of HTF-1100 can be controlled manually using the front panel digital controller or through the MTZ-35 with MT-Lab software.

The furnace and the sample temperatures are measured simultaneously thanks to K-type thermocouples. The furnace temperature is adjusted according to the measured sample temperature.

You may be interested in...

  • MTZ-35

    Frequency Range: 10 μHz to 35 MHz
    Voltage range DC: ±100 μV to ±10 V
    Voltage range AC: 100 μV to 10 V

    Measurement range
    Inductance: 10 nH to 10 kH
    Capacitance: 1 pF to 1000 μF
    Resistance: 1 mΩ to 500 MΩ
    Basic accuracy: 0.1%

    Select this
  • ITS

    Temperature range: -35 °C to +150 °C
    Temperature accuracy: ±0.3 °C
    Computer Interface: USB 2.0
    Power consumption: 250 W
    Dimension: 400 x 313 x 385 mm (L x W x H)
    Weight: 8 kg

    Select this
  • HTSH-1100 – High Temperature Sample Holder

    The High Temperature Sample Holder is specially designed for impedance measurements at high temperatures up to 1100°C.

    Select this