Specifically designed for battery stack/pack characterizations. The FlexP0160 features a continuous maximum current of +49A/-50 A for a single unit that can be extended up to +196A/-200 A by connecting four units in parallel.

In order to fully exploit the total available power of the FlexP0160, a water cooling system is available.

The instrument is also suitable for  Redox Flow Batteries (RFB) or large single cells.

The instrument can be easily upgraded ,in-situ , to meet the user’s specific requirements. The instrument does not need to be sent back to the factory to be upgraded thanks to the plug and play capability of the booster modules.

NOTE when the FlexP0106 is configured with the “0V” option, the name becomes FlexP0060.

The EC-Lab® interface will automatically detect any new configuration ensuring that the transition to the new upgrade occurs seamlessly.

EC-Lab’s stack mode allows the user to measure elements in series within a battery/fuel cell pack. This process is described in the application note: AN#59 – A full solution to address battery modules/packs.

You may be interested in...

  • HCV-3048 Booster

    Channel: single
    Min current dynamic: +/-300 mA
    Max current dynamic: +/-30 A
    Voltage range: 0 V to +48 V
    EIS: up to 500 kHz

    Select this
  • VMP3

    Channel: bipot/multi
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-400 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

    Select this
  • SP-150

    Channel: single
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-800 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

    Select this