Specifically designed for electrolyzer/fuel cell characterizations, the FlexP0012 boasts a continuous maximum current of +/-200 A for a single unit extendable up to +/-800 A by connecting four units in parallel.

In order to fully exploit the total available power of the FlexP 0012, a water cooling system is available.

The instrument can be easily upgraded, in-situ, to meet the user’s specific requirements. The instrument does not need to be sent back to the factory to be upgraded thanks to the plug and play capability of the booster modules.

The EC-Lab® interface will automatically detect any new configuration ensuring that the transition to the new upgrade is seamless.

An example of FlexP0012 use is described in the application note AN#63 relating to Proton Exchange Membrane Water Electrolyzers (PEMWE).

You may be interested in...

  • HCV-3048 Booster

    Channel: single
    Min current dynamic: +/-300 mA
    Max current dynamic: +/-30 A
    Voltage range: 0 V to +48 V
    EIS: up to 500 kHz

    Select this
  • VMP3

    Channel: bipot/multi
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-400 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

    Select this
  • SP-150

    Channel: single
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-800 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

    Select this