My search

Product Line

Type of accessories


The instrument monitors both the resonant frequency and the resonant resistance which are also reflected on the two analog outputs. It is possible to connect the Quartz Crystal Analyzer (QCA922A) to a Biologic potentiostat using a small optional DB9-8BNC cable (ref: 092-22/1). Please have a look at the Application Note AN#13 – VMP3 and Quartz Crystal Microbalance coupling QCM922A
092-QCA-FC_300-cmjn SE-CL3_300-cmjn
092-QCA-FC* SE-CL3
Catalog No. qca-graphe_150-cmjn
Quartz crystal microbalance 27 MHz kit SE-QCA922A
EQCM 27 MHz main unit with cable SE-QCA922A-00
Male BNC/BNC cable (2 pieces, length 1 m) COR28100
Holder is needed to get
a full QCM or EQCM set-up
static and flow QCA cell 092-QCA-FC*
dip cell SE-CL3 Electropolymerization by voltage scan
well cell SE-CL4 of pyrrol to polypyrrol
transparent well cell SE-CL5
flow cell (90 µL) SE-CL7 is transparent SE-CL6/SE-CL7
Connector from QCA to potentiostat 092-22/1
Low flow peristaltic pump EL-AV-008


Frequency range 1 MHz -30 MHz,
resolution 0.1 Hz
Resonant resistance range 10-16 Ω,
resolution 0.1 Ω
ΔF Output full scale: ± 10 V (12 bit)
± 200 Hz / ± 2 kHz /
± 20 kHz / ± 200 kHz
Resistance Output full scale: 0-10 V (11 bit)
1 / 2 / 4 / 8 / 16 kΩ
Gate time variable (10 ms, 20 ms, 0.1 s, 1.0 s, 10.0 s)
Display 40 Digits x 2 rows
Interface IEEE-488, RS-232C, USB
Size 260 x 88 x 230 mm
Weight 3.3 kg Frequency and resistance measurements
Temperature 0 – 40 °C
Power consumption 100-120 V AC,
230-240 V AC,
50-60 Hz, (15 W)
Catalog No.
Resonators 5 MHz f0 = 5 MHz (calibration at 5 MHz at factory with no charge when purchased) gold electrode (25 pieces) SE-5AU electrode-or
Resonators 9 MHz

f0 = 9 MHz

standard finish resonator aluminum electrode (25 pieces) SE-9AL
and lead wire gold electrode (25 pieces) SE-9AU
graphite electrode (25 pieces) SE-9C
cupper electrode (25 pieces) SE-9CU Gold electrode
molybdenum electrode (25 pieces) SE-9MO electrode-platine
nickel electrode (25 pieces) SE-9NI
platinum electrode (25 pieces) SE-9PT
stainless steel (SUS304) electrode (25 pieces) SE-9SS
separated gold electrode (25 pieces) SE-9AU-S
lead wire platinum electrode (25 pieces) SE-9PT-S
mirror finish resonator aluminum electrode (25 pieces) SE-9AL-M
and lead wire gold electrode (25 pieces) SE-9AU-M
gold electrode (20 * 25 pièces) SE-9AU-M2
graphite electrode (25 pieces) SE-9C-M
cupper electrode (25 pieces) SE-9CU-M Platinum electrode
ITO electrode (25 pieces) SE-9IT-M electrode-stainless
nickel electrode (25 pieces) SE-9NI-M
platinum electrode (25 pieces) SE-9PT-M
silicon electrode (25 pieces) SE-9SI-M
stainless steel (SUS304) electrode (25 pieces) SE-9SS-M
titanium electrode (25 pieces) SE-9TI-M
separated gold electrode (25 pieces) SE-9AU-MS
lead wire ITO electrode (25 pieces) SE-9IT-MS
platinum electrode (25 pieces) SE-9PT-MS
Stainless steel electrode
Resonators lead wire no sputter (50 pieces) SE- LEAD/2
Resonators 9 MHz, no sputter no lead wire (50 pieces) SE- 9Q/2
mirror finish no lead wire (50 pieces) SE- 9Q-M/2

Surface finishing

Roughness/µm Electrode materials deposition
Standard finish 0.6 µm sputtered
Etching finish 0.6 µm vacuum deposition
Mirror finish 0.06 µm sputtered
Polish finish 0.06 µm vacuum deposition

*Compatible with A-002222 et A-002233 as CE et A-012167 as RE.