Support

My search

Instruments

Register your instrument

VMP3

EC-Lab demo/freeware v11.21
mini-lockerEC-Lab software v11.21
mini-lockerEc-lab version history

Note

    • If you have some problems with software download (especially with IE browser), please download (save) the software first, then open it and launch it directly from the download folder.
    • – Compatible with Windows XP© (SP3), 7, 8 (32 or 64 bits), 10 (32 or 64 bits).
    • This version is installed in two different folders due to administration authorization. the installation has to be done by the administrator. A part of the program is installed in “Program files” where only the administrator of the computer can write while the other part is installed in the “Documents” folder of the Windows session user. if several users access the computer this second part has to be duplicated in every Windows users sessions in the same “documents” folder.
    • The setup program installs the PDF files into the “./Manual” folder (“.” being the directory where the EC-Lab has been installed). Then the manual can be opened directly or with EC-Lab through the menu : “?, Manual”.

AN#1-Protocols for studying intercalation electrodes materials: Part I: Galvanostatic cycling with potential limitation (GCPL)
AN#2-Protocols for studying intercalation electrodes materials: Part II: Potentiodynamic Cycling with Galvanostatic Acceleration (PCGA)
AN#3-Galvanostatic Cycling with Potential limitation 4: Low Earth Orbit battery satellite protocol
AN#4-Potentiostat stability mystery explained
AN#5-Precautions for good impedance measurements
AN#6-Constant power technique (updated November 5, 2010)
AN#7-Application of the bipotentiostat to an experiment with a rotating ring-disk electrode.
AN#8-Impedance, admittance, Nyquist, Bode, Black, etc…
AN#9-Linear vs. non linear systems in impedance measurements
AN#10-Corrosion current measurement for an iron electrode in an acid solution (updated February 24, 2011)
AN#11-Calculation of the platinum’s active surface
AN#12-UV-Visible Spectroscopy and Electrochemistry coupling: Spectroelectrochemical experiment feasibility on a polypyrrol film
AN#13-VMP3 and Quartz Crystal Microbalance coupling: mass measurement during a polypyrrol film deposition
AN#14-ZFit and equivalent electrical circuits
AN#15-Two questions about Kramers-Kronig transformations
AN#16-Simultaneous Impedance measurements on each element of a running cell stack
AN#17-Drift correction in electrochemical impedance measurements
AN#18-Staircase Potentio Electrochemical Impedance Spectroscopy and automatic successive ZFit analysis
AN#19-EIS measurements with multisine
AN#20-Pseudo capacitance calculation (updated December 9, 2010)
AN#21-Measurements of the double layer capacitance
AN#22-Corrosion of reinforced concrete
AN#23-EIS measurements on Li-ion batteries-EC-Lab software parameters adjustment (updated December 9, 2010)
AN#24-Photovoltaic Characterizations: Polarization and Mott Schottky plot
AN#25-Multi Pitting Corrosion
AN#26-Graphic Customization
AN#27-Ohmic Drop: Part I: Effect on measurements
AN#28-Ohmic Drop: Part II: Introduction to Ohmic Drop measurement techniques
AN#29-Ohmic Drop Part III: Suitable use of the ZIR techniques?
AN#30-IMVS investigation on photovoltaic cell (updated June 8, 2010)
AN#33-Supercapacitors investigations-Part I: Charge/discharge cycling (updated August 28, 2012)
AN#34-Supercapacitors investigations-Part II: Time constant determination (updated May 2, 2014)
AN#35-Application of the Capacitance-Voltage curve to photovoltaic cell characterizations
AN#36-VASP: An innovative and exclusive technique for corrosion monitoring
AN#37-CASP: a new method for the determination of corrosion parameters (updated October 20, 2011)
AN#38-Dynamic resistance determination. A relation between AC and DC measurements?
AN#40-Differential (Incremental) Capacity Analysis
AN#41-I – CV Sim-Simulation of the simple redox reaction (E)-Part I : The effect of the scan rate
AN#41-II – CV Sim-Simulation of the simple redox reaction (E)-Part II : The effect of the ohmic drop and the double layer capacitance
AN#42-ZFit : The modified inductance element La.
AN#43-How to fit transmission lines with ZFit
AN#44 – Artefacts in EIS measurements
AN#45 – Using ZFit for multiple cycles analysis
AN#46 – Dilatometer
AN#47 – Corrosion current determination with mass transfer limitation
AN#48 – Inaccuracy of the corrosion current determination in presence of an ohmic drop: EC-Lab® solutions
AN#49 – EIS measurements: Potentio (PEIS) vs. Galvano (GEIS) mode, that is the question!
AN#50-I – Math Reminder for electrochemists: I. The simplicity of complex number and impedance diagrams
AN#50-II-Math Reminder for electrochemists: II. The simplicity of Laplace transform
AN#51-Supercapacitor characterization by galvanostatic polarization method-(.pdf 597 Ko)
AN#52-UFS-SEC: the spectroElectrochemical Cell for UV-Vis, NIR and IR measurement-( .pdf 208 Ko )
AN#53 – Precision and Accuracy in Coulombic Efficiency Measurements (.pdf 654 Ko). Sample data (.mpr 16 Mo).
AN#54 – How to read EIS accuracy contour plots
AN#55 – Interpretation problems of impedance measurements made on time variant systems
AN#56 – Electrochemical reaction kinetics measurement: the Levich and Koutecký-Levich analysis tools
AN#57 – Differential Coulometry Spectroscopy (DCS)
AN#58 – Cycling battery with reference electrode by using the PAT-cell test cell
AN#61 – How to interpret lower frequencies impedance in batteries ?
AN#62 – How to measure the internal resistance of a battery using EIS ?
AN#63 – High current (DC and EIS) measurements on electrolyzer ?

mini-lockerTN 3 – Computer TCP/IP installation and configuration

mini-lockerTN 4 – VMP2, VMP or MPG firmware upgrading

mini-lockerTN 6 – The Data smooth option (updated February 8, 2010)

mini-lockerTN 7 – The “compact” Function in the PCGA protocol

mini-lockerTN 8 – Adjustment of the potential control resolution

mini-lockerTN 9 – Various connection modes Part I: Ewe vs. Ece control in the standard mode

mini-lockerTN 10 – “p” low current option: installation and calibration

mini-lockerTN 11 – Other channel to cell connection mode – Part II: CE to Ground mode

mini-lockerTN 12 – Low current N’Stat box installation (VMP2, BiStat, VSP, VMP3)

mini-lockerTN 13 – Long cell cables

mini-lockerTN 17 – Instantaneous versus averaged current measurement

mini-lockerTN 18 – Channel board: installation and calibration for VMP2, VMP3, VSP

mini-lockerTN 19 – Network parameters configuration with EC-Lab® and EC-Lab® Express software

mini-lockerTN 20 – MEASURE versus CONTROL mode: extended current ranges

mini-lockerTN 21 – External device control and recording

mini-lockerTN 22 – Graphic properties – Part I: Graph Style definition

mini-lockerTN 23 – Graphic properties – Part II: Graph Representation definition

mini-locker TN 26 – How to configure an experiment with a platinum temperature probe?

mini-lockerTN 27 – SAM-50 : Module for measurements on stack of 50V

mini-lockerTN 28 – EQCM cell Set-up

mini-lockerTN 29 – How to use the purge tube?

mini-lockerTN 30 – Which GCPL technique is the most appropriate for my measurement?

mini-lockerTN 32 – How to set the data recording conditions of my measurement?

mini-lockerTN 34 – How fast the instrument is able to switch from potentio to galvano mode & vice versa?

mini-lockerTN 35 – Bandwidth selection

mini-lockerTN 36 – Boards validation

mini-lockerTN 37-Peristaltic pump Installation

mini-lockerTN 39 – Import urban profile (txt file)

WP#1  – Studying batteries with Electrochemical Impedance Spectroscopy (EIS)