Support

My search

Instruments

Register your instrument

FCT-50/FCT-150 S

mini-locker FC-Lab software v5.22
mini-lockerFC-Lab version history

EC-Lab demo/freeware v11.20
mini-lockerEC-Lab software v11.20
mini-lockerEc-lab version history

Note

  • If you have some problems with software download (especially with IE browser), please download (save) the software first, then open it and launch it directly from the download folder.
  • – Compatible with Windows XP© (SP3), 7, 8 (32 or 64 bits), 10 (32 or 64 bits).
  • This version is installed in two different folders due to administration authorization. the installation has to be done by the administrator. A part of the program is installed in “Program files” where only the administrator of the computer can write while the other part is installed in the “Documents” folder of the Windows session user. if several users access the computer this second part has to be duplicated in every Windows users sessions in the same “documents” folder.
  • The setup program installs the PDF files into the “./Manual” folder (“.” being the directory where the EC-Lab has been installed). Then the manual can be opened directly or with EC-Lab through the menu : “?, Manual”.

AN#4-Potentiostat stability mystery explained
AN#5-Precautions for good impedance measurements
AN#8-Impedance, admittance, Nyquist, Bode, Black, etc…
AN#9-Linear vs. non linear systems in impedance measurements
AN#14-ZFit and equivalent electrical circuits
AN#15-Two questions about Kramers-Kronig transformations
AN#17-Drift correction in electrochemical impedance measurements
AN#18-Staircase Potentio Electrochemical Impedance Spectroscopy and automatic successive ZFit analysis
AN#19-EIS measurements with multisine
AN#20-Pseudo capacitance calculation (updated December 9, 2010)
AN#21-Measurements of the double layer capacitance
AN#27-Ohmic Drop: Part I: Effect on measurements
AN#28-Ohmic Drop: Part II: Introduction to Ohmic Drop measurement techniques
AN#29-Ohmic Drop Part III: Suitable use of the ZIR techniques?
AN#30-IMVS investigation on photovoltaic cell (updated June 8, 2010)
AN#31-Fuel Cell Testing-Part I: Overview and I/E characterizations
AN#32-Fuel Cell Testing-Part II: EIS characterization
AN#38-Dynamic resistance determination. A relation between AC and DC measurements?
AN#54 – How to read EIS accuracy contour plots
AN#55 – Interpretation problems of impedance measurements made on time variant systems
AN#58 – Cycling battery with reference electrode by using the PAT-cell test cell
AN#61 – How to interpret lower frequencies impedance in batteries ?
AN#62 – How to measure the internal resistance of a battery using EIS ?

WP#1  – Studying batteries with Electrochemical Impedance Spectroscopy (EIS)