The FlexP 0160 is designed for battery stack/pack characterizations. The continuous maximum current of +/-50 A for a single unit can be extended up to +/-200 A by connecting four units in parallel.

The instrument configuration can be easily changed as needed on-site by the end-user. The instrument does not need to be sent back to the factory to be upgraded thanks to the plug and play capability of the booster modules.

The EC-Lab® will automatically and immediately detect the new configuration.

The stack mode available in EC-Lab allow the user to measure elements in series within a pack of battery/fuel cell. This is described in this application note: AN#59 – A full solution to address battery module/pack.

 

You may be interested in...

  • HCV-3048 Booster

    Channel: single
    Min current dynamic: +/-300 mA
    Max current dynamic: +/-30 A
    Voltage range: 0 V to +48 V
    EIS: up to 500 kHz

    Select this
  • VMP3

    Channel: bipot/multi
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-400 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

    Select this
  • SP-150

    Channel: single
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-800 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

    Select this