SP-300

  • Up to 2 channels
  • Compliance: ±12 V up to ±49 V with booster
  • Control voltage: ±10 V up to ±48 V with booster
  • Potential resolution: 1 µV
  • EIS measurement: 10 μHz – 3 MHz (1%, 1°), 10 μHz – 7 MHz (3%, 3°)
  • EIS quality indicators
  • Current ranges: 1 A to 10 nA (standard)
  • Maximum current: ±500 mA (standard)
  • Current resolution: 760 fA (standard)
  • Low current: 6 ranges from 100 nA to 1 pA with resolution to 76 aA
  • Floating mode
  • Analog filtering
  • Calibration board
  • Full stability control mode (9 bandwidths)
Return to the list

Fast, Sensitive, stable and modular

SP-300 is a 500 mA to 10 A state-of-the-art research grade potentiostat/galvanostat/EIS with remarkable specifications such as 7 mHz max frequency, floating mode, analog filtering, built-in calibration board, and stability bandwidths.

The SP-300’s modular chassis accept an optional high current/high voltage option board.

Alternatively, the SP-300 can accept a second potentiostat board (either standard or EIS) and perform as a Bipotentiostat to perform RRDE experiment. It is also a multiple user system as each channel board can be used independently by two different researchers.

You may be interested in...

  • VSP-300

    Channel: bipot/multi
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +/-40 A
    Voltage range: -10 V to +10 V
    with option: -48V to +48V
    EIS: up to 7 MHz

    Select this
  • VMP-300

    Channel: bipot/multi
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +/-150 A
    Voltage range: -10 V to +10 V
    with option: -48 V to +48 V
    EIS: up to 7 MHz

    Select this
  • Boosters for VMP-300 instruments (internal)

    An extended range of booster modules for the SP/VSP/VMP-300 workstations

    Select this
  • Analog Ramp Generator

    The Analog Ramp Generator (ARG) is an optional module. It is automatically detected and provides an analog voltage scan up to 1 MV/s with an acquisition time down to 1 μs. This option ARG is only compatible with VMP-300 instruments and doesn’t take any slot in the potentiostat/galvanostat chassis.   Specifications Compatible with VMP-300 instruments […]

    Select this