BP-300

  • 2 channels
  • Compliance: ±12 V up to ±49 V with booster
  • Control voltage: ±10 V up to ±48 V with booster
  • Potential resolution: 1 µV
  • EIS measurement: 10 μHz – 3 MHz (1%, 1°), 10 μHz – 7 MHz (3%, 3°)
  • Current ranges: 1 A to 10 nA (standard)
  • Maximum current: ±500 mA (standard)
  • Up to 30 A with HCV-3048
  • Current resolution: 760 fA (standard)
  • Low current: 6 ranges from 100 nA to 1 pA with resolution to 76 aA
  • Floating mode
  • Analog filtering
  • Calibration board
  • Full stability control mode (9 bandwidths)
Return to the list

The ultimate versatile bipot

The BP-300 is a Bipotentiostat/Bigalvanostat equipped with EIS capability and analog ramp generator. With the specific EC-Lab product control mode, the so-called CE to Ground mode, the BP- 300 can address any bipot measurement. This measurement is typically required for Rotating Ring Disk Electrode (RRDE) set-up and InterDigitated Array (IDA) electrodes.

The BP-300 can also be used as multichannel with two measuring channels that can be controlled by one or several computer(s).

You may be interested in...

  • HCV-3048 Booster

    Channel: single
    Min current dynamic: +/-300 mA
    Max current dynamic: +/-30 A
    Voltage range: 0 V to +48 V
    EIS: up to 500 kHz

    Select this
  • VMP-300

    Channel: bipot/multi
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +/-150 A
    Voltage range: -10 V to +10 V
    with option: -48 V to +48 V
    EIS: up to 7 MHz

    Select this