HTF-1100

Insulation materialFiber Alumina
Heating System

Super Kanthal 1350°C wire built in a cement cylinder

Temperature Range

Ambient up to 1100°C

Temperature Controller

PM6 Watlow PID controller

Temperature Sensors

Two K-Type Thermocouples (one for furnace, one for sample)

Temperature Control Accuracy

Better than +/-1°C

Temperature scan

adjustable (from 0.1 °C/min to 20 °C/min)

Safety FeaturesEmergency stop button
Buzzer sound alarm
Temperature safety limit
    Return to the list

    HTF-1100 is a High Temperature Furnace able to reach 1100°C.

    This furnace has to be used in conjunction with a MTZ-35 impedance analyzer and a specific sample holder designed for high temperature measurements.

    HTF-1100 consists of a temperature control unit, an alumina heater and a slide on the front panel to insert and extract easily the sample holder from the furnace.

    The temperature of HTF-1100 can be controlled manually using the front panel digital controller or through the MTZ-35 with MT-Lab software.

    The furnace and the sample temperatures are measured simultaneously thanks to K-type thermocouples. The furnace temperature is adjusted according to the measured sample temperature.

    You may be interested in...

    • MTZ-35

      Frequency Range: 10 μHz to 35 MHz
      Voltage range DC: ±100 μV to ±10 V
      Voltage range AC: 100 μV to 10 V

      Measurement range
      Inductance: 10 nH to 10 kH
      Capacitance: 1 pF to 1000 μF
      Resistance: 1 mΩ to 500 MΩ
      Basic accuracy: 0.1%

      Select this
    • ITS

      Temperature range: -35 °C to +150 °C
      Temperature accuracy: ±0.3 °C
      Computer Interface: USB 2.0
      Power consumption: 250 W
      Dimension: 400 x 313 x 385 mm (L x W x H)
      Weight: 8 kg

      Select this
    • HTSH-1100 – High Temperature Sample Holder

      The High Temperature Sample Holder is specially designed for impedance measurements at high temperatures up to 1100°C.

      Select this