MPG-2

  • Compliance: -10; +10 V
  • Current ranging from 10 μA up to 100 mA
  • Current resolution: 760 pA
  • Control voltage: -10; +10 V
  • Voltage resolution: 5 μV
  • Acquisition time: 200 μs
  • No limit in time and data recording
  • EIS measurement from 10 µHz to 20 kHz
  • Control software: EC-Lab®
    Return to the list

    Research grade battery tester with optional EIS capability

    The MPG-2 is a multi-channel, research grade battery cycler designed for research on intercalation compounds, batteries and supercapacitors.

    The MPG-2 is the next generation of the Bio-Logic’s popular MacPile testing unit.

    Battery testing typically requires a large number of simultaneous tests being performed. As a result, the configuration of MPG-2 is fixed at 16 channels. Each channel is an independent potentiostat / galvanostat.

    The MPG-2 is controlled by a PC using a USB or an Ethernet connection. When using an Ethernet connection, the MPG-2 can be installed on a Local Area Network to allow multiple users to access the instrument.

    Each channel has two analog inputs and an analog output to allow interfacing with external instruments. For many battery experiments, it is sometimes necessary to control and record the cell’s temperature or the temperature of a thermostatically controlled chamber.

    The MPG-2 is supplied with EC-Lab® software, especially adapted for battery and supercapacitor applications. Ten of the MPG2’s techniques are designed specifically for batteries. There are also general electrochemistry techniques which are important in battery research, such as cyclic voltammetry. Specific analysis tools are also available.

    You may be interested in...

    • BCS-805

      Channels: 8
      Max current: +/-150 mA
      Voltage range: 0 V to 10 V
      Optional EIS: 10 kHz to 10 mHz
      Current resolution: 18 bit
      Time resolution: 2ms

      Select this
    • BCS-810

      Channels: 8
      Max current: +/- 1.5 A
      Voltage range: 0 V to 10 V
      Optional EIS: 10 kHz to 10 mHz
      Current resolution: 18 bit
      Time resolution: 2ms

      Select this
    • Coin cell holder

      The coin cell holder is directly plugged to the potentiostat connectors.

      Select this