Electrochroms

An Electrochroms material is a material that reversibly changes its color. This color changed is caused by an electrochemical process. Thanks to this property, these materials can be used to develop screens or specific glasses.

Literature

Electrochemistry
AN#12 – UV-Visible Spectroscopy and Electrochemistry coupling: Spectroelectrochemical experiment feasibility on a polypyrrol film
AN#18 – Staircase Potentio Electrochemical Impedance Spectroscopy and automatic successive ZFit analysis
AN#26 – Graphic Customization
AN#52 – UFS-SEC: the spectroElectrochemical Cell for UV-Vis, NIR and IR measurement

Local Electrochemistry Investigation
AN#1 – Height tracking with the SKP370 or SKP470 module
AN#4 – Post-treatment and optimization of area scan experiments
AN#5 – Introducing the Microscopic Image Rapid Analysis (MIRA) software
AN#8 – Graphical and analysis tools in M370/M470 software
AN#12 – 3D Map production using the 3DIsoPlot software

Related instruments

  • FlexP 0160

    FlexP 0160

    High Power Booster for VMP3 (FlexP 0160)

    The FlexP 0160 is designed for battery stack/pack characterizations. The continuous maximum current of +/-50 A for a single unit can be extended up to +/-200 A by connecting four units in parallel.

    Channel: single
    Min current dynamic: +/-500 mA
    Max current dynamic: +/-50 A
    Voltage range: 1 V to +60 V
    EIS: up to 10 kHz

  • HCV-3048 Booster

    HCV-3048 Booster

    Fast and powerful current & voltage external booster for VMP-300 series

    The HCV-3048 is designed for battery stack/pack characterizations. The continuous maximum current of +/-30 A for a single unit can be extended up to +/-120 A by connecting four units in parallel.

    Channel: single
    Min current dynamic: +/-300 mA
    Max current dynamic: +/-30 A
    Voltage range: 0 V to +48 V
    EIS: up to 500 kHz

  • M370 – dc-SECM

    M370 – dc-SECM

    The probe used in this technique is a tapered disk ultramicroelectrode. The resolution depends on the size of the electrode. The system is provided with a positioning system, two control boxes hosting the two pstat/gstats and the positioning control.

    Direct current Scanning Electrochemical Microscope.
    Measures the local electrochemical reactivity of a surface using dc current.

  • M470 – ac/dc-SECM

    M470 – ac/dc-SECM

    The probe used in this technique is a tapered disk ultramicroelectrode. The resolution depends on the size of the electrode. The system is provided with a positioning system, a control box hosting two pstat/gstats/FRA to polarize both the sample and the electrode.

    Alternating and direct current Scanning Electrochemical Microscope.
    Measures the local electrochemical reactivity of a surface using dc current or the impedance of the probe.

  • M470 – ic-SECM

    M470 – ic-SECM

    The SECM probe maintained at a constant distance from the sample. Rough, large, uneven samples can be studied using this mode with dc- or ac-SECM. In addition to an ac/dc-SECM system, it only requires an additional piezo element and two LIAs (Lock-In Amplifier) hosted by the control box.

    Intermittent contact SECM.
    Measures the local reactivity of a surface at a constant distance, instead of constant height.

  • SP-150

    SP-150

    Powerful in a versatile chassis

    The SP-150 is a value oriented reseach grade potentiostat/galvanostat

    Channel: single
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-800 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

  • SP-200

    SP-200

    Compact and powerful in a portable chassis

    The SP-200 is a fast & sensitive high end potentiostat/galvanostat.

    Channel: single
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +/- 500 mA
    Voltage range: -10 V to +10 V
    with option: -10 V to +10 V
    EIS: up to 7 MHz

  • SP-240

    SP-240

    Compact and powerful in a portable chassis

    SP-240 is the newest, research grade, value-oriented potentiostat / galvanostat in the Bio-Logic product range offering up to 4 Amps.

    Channel: single
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/4 A
    Max with current booster option: +/-30 A
    Voltage range: -10 V to +14 V
    with option: -48 V to +48 V
    EIS: up to 7 MHz

  • SP-300

    SP-300

    Fast, Sensitive, stable and modular

    SP-300 is a state-of-the-art modular high end potentiostat / galvanostat / FRA with remarkable specifications.

    Channel: single/bipot
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +-A30
    Voltage range: -10V to +10V
    with option: -48V to +48V
    EIS: up to 7 MHz

  • SP-50

    SP-50

    Economical and easy to use

    The SP-50 is an educational Potentiostat/galvanostat

    Channel: single
    Min current dynamic: +/-20 nA
    Max current dynamic: +/-800 mA
    Voltage range: -10 V to +10 V
    EIS: no

  • VMP-300

    VMP-300

    A new step in the combination of performance and versatility

    VMP-300 is an ultimate and modular 16 channel potentiostat/galvanostat

     

    Channel: bipot/multi
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +/-150 A
    Voltage range: -10 V to +10 V
    with option: -48 V to +48 V
    EIS: up to 7 MHz

  • VMP3

    VMP3

    Multi-Channel & Multi-Users

    The VMP3 is a modular 16 channel potentiostat/galvanostat

    Channel: bipot/multi
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-400 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

  • VSP

    VSP

    Ultimate Electrochemical Workstation

    The VSP is a research grade potentiostat system in a 5-channel modular chassis. This allows the VSP to add additional capability in the way of plug-in “modules”.

    Channel: bipot/multi
    Min current dynamic: +/-20 nA
    Min with LC/ULC option: +/-2 pA
    Max current dynamic: +/-400 mA
    Max with current booster option: +/-100 A
    Voltage range: -20 V to +20 V
    EIS: up to 1 MHz

  • VSP-300

    VSP-300

    Fast, sensitive, stable and modular… a remarkable combination!!!

    VSP-300 is a state-of-the-art high end potentiostat / galvanostat / FRA with remarkable specifications.

    Channel: bipot/multi
    Min current dynamic: +/-100 pA
    Min with LC/ULC option: +/-100 fA
    Max current dynamic: +/-500 mA
    Max with current booster option: +/-40 A
    Voltage range: -10 V to +10 V
    with option: -48V to +48V
    EIS: up to 7 MHz